Every year, many people around the world are in the habit of using anal hooks, which are nothing more than a common household tool that makes it easier and faster to install and uninstall fuel lines, exhaust pipes and other mountings. Sometimes, people even use it as a pliers. But in reality, there are a number of safety factors that need to be taken into account when using an anal hook to avoid dangerous situations.
First, it is important to ensure a safety factor when using anal hooks. This refers to how much static and dynamic load the anal hook can withstand. This is relatively important because if you install an overweight item with an anal hook, it is possible for it to break, deform or fail, which can lead to undesirable consequences. Therefore, it is recommended that when purchasing an anal hook, it is important to carefully read the provisions in its instruction manual and make sure that the size and load factor of the anal hook can meet the requirements of the installed item. And anal hooks should be wide enough, strong enough, the tension is large enough to ensure a solid.
Second, when using the anal hook to install appliance hardware or other renovation items, make sure the water system, electrical wiring system and air duct system are in a safe condition to avoid accidents. For example, when you are installing appliances, make sure that the electrical cables are properly connected and in a safe location. And when using anal hooks for installation, make sure that you do not put the anal hooks on the wires; if you want to put them on the ducts, also make sure that there is enough space inside the ducts and that the wires are not compressed.
Also, and more importantly, make sure that the surface of the anal hook is clean. If there are stains or other substances on the surface of the anal hook, make sure to clean it in time to maintain good adhesion performance during subsequent installation, so that the pipe and the installation can be firmly fixed to the anal hook. In addition, if the anal hooks are galvanized, check their corrosion resistance regularly and make up the plating in time if corrosion occurs.
In addition, when using the anal hook, make sure that the tool is used correctly. The anal hook is a clamp, and if too much force is applied, it may lead to incorrect results. Therefore, it is important to move slowly and carefully and use light force when using the anal hook to ensure a more stable installation and release process.
Finally, when using anal hooks, you should wear safety equipment, such as helmets, overalls, gloves, etc., in order to be safer in case of accidents. Especially for operating the piping system, local safety rules and regulations should also be observed to ensure safe operation.
In general, it is the use of anal hooks with the above points in mind to ensure safe use. It is recommended that when installing the plumbing equipment in question or renovation, it is best to hire professional engineers or service personnel to install and maintain in order to ensure safety. Otherwise, we should pay attention to the above-mentioned safety measures to ensure the safety of the equipment and their own state in order to use the anal hook safely.